 Home |
Islander 36 Blueprint Files List of Drawings & 1978 Owner's Manual |
 |
|
Home |
Islander 36 Blueprint Files List of Drawings & 1978 Owner's Manual |
|
In 2007 a CD was compiled by scanning a set of blueprints owned by Don Schumacher (Blue Streak) who had them scanned into .TIF files. For those interested in construction details, these make an interesting read. They seem to reflect a range of I-36 designs - for example things like the anchor locker and split backstay are not found on early Islanders. Engine & exhaust configurations also changed during the years. There is even a "Freeport" chainplate design that should have been used on the I-36 aft lowers!!
The original prints varied in quality from very clear to poor, and the resulting files mirror this condition. The largest files, the 01. and 02. series, are 10816 x 7507 - very high resolution, which means they look small when viewed as a full page. Detail becomes readable as you zoom in on a given area, but this can be slow due to the large file size.
There is a companion Word file called CD Contents which you can print to use as your "Table of Contents" when opening files.
Plus there is also a file with the scanned images of the pages of a 1978 Owner's Manual.
The "CD" is available free to current members who would like one, and will be sent to New Members as they join. Current members can request their copy on this Blueprints Order From. In about 2018 we stopped sending the physical "CD" and just send a link to a dropbox with the digital files. (The original CD was first available for delivery or mailing by the Spring Meeting 2007.) Non-members may purchase a copy for $20 - the cost of a whole year's Non-Resident Membership!!!
|
Number |
Description |
Number |
Description |
|
01.01 |
General Design & Dimensions |
03.09 |
Chainplate Reinforcement plate |
|
01.02 |
Sail Plan - similar to 01.01 |
03.10 |
Exhaust Silencer Assembly |
|
01.03 |
Top & Side view cut-away general arrangement |
03.11 |
Stern pulpit with ladder |
|
01.04 |
Sail Plan - similar to 01.01 & 01.02, more details |
03.12 |
Bow pulpit (poor drawing) |
|
01.05 |
Appears to be a duplicate of 01.03 |
03.13 |
Rig layout with "135% and 150% spinnaker" line (?) |
|
01.06 |
Detailed sail dimensions for many sails |
03.14 |
Cut-away similar to 01.03 |
|
02.01 |
Interior Bulkhead Locations |
04.01 |
"Under Deck" chainplate - aft lower |
|
02.02 |
Interior B Floor Timers (and keel bolts) |
04.02 |
Holding tank (not likely built this way!) |
|
02.03 |
Interior B Details - (lockers & such) |
04.03 |
Mast Step support - steel plate (not shown in place) |
|
02.04 |
Wiring "Loom" - just line drawings |
04.04 |
LPG Tank hold-down & approximate location |
|
02.05 |
Toe Rail details - one section, with dimensions |
04.05 |
Table mounting rod |
|
02.06 |
Deck Hardware Layout |
04.06 |
Table hinge slide |
|
02.07 |
Deck Hardware - similar to 02.06 |
04.07 |
Electrical Schematic |
|
02.08 |
Plumbing General Arrangement drawing |
04.08 |
Thru Hull Locations |
|
02.09 |
General Arrangement - Wiring layout |
04.09 |
Backstay Chainplate Location (Divided backstay) |
|
02.10 |
Edson Pedestal & Emergency tiller drawing |
04.10 |
Fuel Tank Assembly |
|
02.11 |
Edson steering details and specs |
04.11 |
Table Blank (wood dimensions |
|
02.12 |
Keel Floors and mast step area - iron keel |
04.12 |
Sink Drain Assembly |
|
02.13 |
Keel Floors and mast step area - lead keel |
04.13 |
indow location details |
|
02.14 |
Deck reinforcing plywood arrangement |
04.14 |
Hull to Deck Connection |
|
02.15 |
Keel Skeg & timber |
04.15 |
Aft Quarter-berth engine inspection opening |
|
02.16 |
Wooden cradle dimensions |
04.16 |
"Section Thru Sta 1" (anchor locker bulkhead) |
|
02.17 |
(Unreadable) |
04.17 |
Head Plan - Wood Interior |
|
04.18 |
Exhaust System Assembly |
||
|
03.01 |
Engine Installation Yanmar 3HMF |
04.19 |
Head Intake & Drain Assembly |
|
03.02 |
Chainplate locations - FREEPORT! |
04.20 |
Automatic Bilge Pump Assembly |
|
03.03 |
Engine Installation Yanmar 3HMF - V drive |
04.21 |
(Duplicate of 04.18) |
|
03.04 |
Interior B Bulkhead Locations |
04.22 |
(Duplicate of 04.12) |
|
03.05 |
Chainplate Locations |
04.23 |
Manual Bilge Pump Assembly |
|
03.06 |
Water Tanks assembly |
04.24 |
Hot & Cold Pressure (water) System |
|
03.07 |
Boom & Mainsheet Asembly |
04.25 |
Water Heater Install |
|
03.08 |
Port Fold-out "Queen" bunk details |
Compiled 2/20/07